1 / 7
Metallsägeblatt 300mm Halter / Metallblade 300mm Handle — zdjęcie 1
1 / 7

Metallsägeblatt 300mm Halter / Metallblade 300mm Handle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hier ein Einhandgriff für Handsägeblätter 300 mm Metall (Bügelsäge) Funktioniert ganz gut für ein wenig Kunststoff…

Ocena
0 / 5
Polubienia
0
Pobrania
22
Wydruki
0
Wyświetlenia
126
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Hier ein Einhandgriff für Handsägeblätter 300 mm Metall (Bügelsäge)

Funktioniert ganz gut für ein wenig Kunststoff schneiden.

Für ernster zu nehmende Metallarbeiten wäre das Einspannen in die Bügelsäge natürlich "interessanter" ;)

Du brauchst noch:

1 Schraube M4x10 1 Unterlegscheibe M4 1 M4-Mutter 1 Metall-Sägeblatt ;) Ich hab den Griff relativ hochkant im Slicer gehabt, um die Öffnung für das Sägeblatt sauberer drucken zu können. Gehen zwar noch 2 Meter Filament für Support weg, aber dafür gibts so gut wie keine Nacharbeiten.


Google sagt:

Here is a one-handed handle for hand saw blades 300 mm metal (hacksaw)

Works quite well for a little plastic cutting.

For more serious metal work, clamping it into the hacksaw would of course be more “interesting” ;)

You still need:

1 screw M4x10 1 washer M4 1 M4 nut 1 metal saw blade ;) I kept the handle relatively upright in the slicer so that I could print the opening for the saw blade more cleanly. Although 2 meters of filament are still needed for support, there is almost no rework required.

Category: Tools

Tagi