Tobii Eye Tracker 4C mount for Mi Surface Display 34'' 1500R
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very specific mount for a specific monitor, probably won't work for any other without remixing
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 91
- Wydruki
- 1
- Wyświetlenia
- 601
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Originally I used this mount https://cults3d.com/en/3d-model/gadget/tobii-eye-tracking-4c-curved-monitor-mount, but I was unhappy with it because tracker holder wasn't snug and allowed the tracker to rotate, and stable positions were either too high or too low for me. Also double sided tape did not stick to my monitor and tracker fell off every couple of days.
So I made my own mount, with a good fit for the tracker and a monitor mount which holds on to the bezel of my Mi Surface Display 34'' (XMMNTWQ34). Any other monitor will probably have different dimensions, so for that I included STEP file and Solidworks source, if you want to grab tracker mount from there and make your own monitor mount.
For those that do have the same monitor, print 2 mounts, one of them mirrored along z axis, to accommodate curve of the monitor. Mounts were designed to be aligned with calibration marks on top of the tracker, see the photo