Harbor Freight Stubby Socket Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray for Harbor Freight Stubby Sockets, based the design on the 1/2 inch impact ones.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 462
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
The hole diameter for 7/16-5/8 are 125/128 or 24.89mm
Hole Diameter for the 11/16 is 1-3/64 or 26.67mm
Hole Diameter for the ¾ is 1-15/128 or 28.45mm
Hole Diameter for the 13/16 is 1-13/64 or 30.48mm
Hole Diameter for 7/8 to 1-1/8 are all 1-7/32 or 30.99mm
Hopefully that will help you to know if this tray will fit the sockets you have.
As for print settings
Brim (I used anti warp tabs from a plugin just so the corners don't warp)
20% infill (any infill pattern you prefer)
3 walls
Thats what I used but ofcourse use whatever settings you feel appropriate.
I used PLA but can use whatever material you want for how tough you need or want it to be.
I would recommend having it print the numbers a little slower to ensure they come out well, its what I did just incase but your results may vary.
Hope this brings some helpful organization to your tool box