1 / 4
Makita Battery Adapter to Suit XH-M609 Voltage Cutoff Board
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Noloxs' adapter - with this remix the adapter now accepts a XH-M609 programmable voltage cutoff board.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 671
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
Remix of Noloxs' adapter - with this remix the adapter now accepts a XH-M609 programmable voltage cutoff board.
Parts Required:
- Makita Terminal: I used 643852-2 but 644808-8 should also work
- XT-60 connector
- XH-M609 circuit board
- 4x 6mm 4G self tapping screw - to secure circuit board
- 4x M4 Countersunk screws - to secure two halves of adapter
- Small length of wire for connecting everything up
I removed the two Green terminal clamps on the XH-M609 and soldered the input and output wires directing to the board to allow for some more room.
When printing you can choose either the captive nut base or thread insert base depending on what you prefer.