Hangar Sub Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sub hook that fits over a coat hangar to allow accessories or even another coat hangar to be dangled from it.
- Ocena
- 4,75 / 5
- Polubienia
- 32
- Pobrania
- 125
- Wydruki
- 6
- Wyświetlenia
- 449
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I've seen these sub hooks being sold that fit over a coat hangar to allow accessories or even another coat hangar to be dangled from. A simple idea that can be easily reproduced with a 3D printer and at a low cost.
Here is my design that duplicates the functionality of the hooks. The choice of 3D filament type is open.
My print is made with eSUN PLA+ 1.75mm Orange filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. No supports required. No printing rafts required, but support for the hole will improve the print finish.
I hope that you can find this print useful, too.
Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.