Prusament Weeding Tool Cleaner Container (Cricut)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are parts that you can use to convert a Prusament spool cardboard core into a weeding tool cleaner container.
- Ocena
- 5 / 5
- Polubienia
- 146
- Pobrania
- 228
- Wydruki
- 3
- Wyświetlenia
- 1957
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
If you already have the container from Uko printed, you just have to print the new Top version.
Do you own a Cricut or any other similar machine? Well then you're familiar with weeding and know how annoying it is to always have to clean those small sticky pieces of vinyl off of your weeding tool! With this prusament container weeding cleaner tool, you can quickly, easily and conveniently clean it.
These are parts that you can use to convert a Prusament spool cardboard core into a container.
Insert the top and bottom parts from both sides into a spool core. The "teeth" on the parts align with the teeth on the original spool sides. First, try to align the printed parts with the grooves that were left after spool parts. If there is not enough friction to hold the part in place — insert it in a way where the teeth don't align with the grooves.
Print instructions
0.2 layer height will work, but smaller layer heights result in better screwing experience.