1 / 2
FrameUnit Support for Split Flap Display — zdjęcie 1
1 / 2

FrameUnit Support for Split Flap Display

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Unit Frame Support/Stand-Off for the famous Split Flap Display by @DavidKingsman.

Ocena
0 / 5
Polubienia
2
Pobrania
50
Wydruki
0
Wyświetlenia
197
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Once a FrameUnit is mounted to the MiddleFrame, you will notice the structure will tip over slightly. While you are building the model you can prevent tipping-over with this little support.

Print a couple of this model at once and use one of these supports on each already mounted FrameUnit.

Its a friction fit, so press lightly onto the UnitFrame.
Scale the length to your liking/stability needs.

Remove them once you mount the FrontCover pieces.

Tagi