Kettlebell V2 - upgraded for MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an improved version of my Kettlebell model with separate bodies that allow for easier multi material printing.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 141
- Wydruki
- 0
- Wyświetlenia
- 620
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of my Kettlebell keychain model, now with separate bodies to allow for easier MMU painting.
Printing Tips
I tried a few different combinations and my favorite was a light color for the body (mate green) and black for the handle and the number. I used 0.20mm (quality) with 100% infill to give it a nice weight. I used a brim to be on the safe side.
The included .3mf file has the pre-sliced model with painting. A few details for a perfect print:
- Make sure the seam is on the side of the model, so it doesn't ruin the numbers
- Make sure you set a higher purge volume when transitioning from dark to lighter colors (I used 340)
- More models means less waste. You can also set the model to purge to infill.
These are already set on the pre-sliced file, but you can double check especially if you change the painting.