1 / 2
Makita 5s PD QC 100W Power Bank Battery Adapter — zdjęcie 1
1 / 2

Makita 5s PD QC 100W Power Bank Battery Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adaptation of a power bank PCB from Aliexpress with all major qc protocols and cell balancing.

Ocena
0 / 5
Polubienia
16
Pobrania
81
Wydruki
1
Wyświetlenia
916
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Adaptation of a power bank PCB from Aliexpress with all major qc protocols and cell balancing.

Holes are almost necessary. Heat output is around 10w in the worst case scenario.

PETG or ABS/PC recommended. PCB reaches up to 70°C.

Screws are M3x10.

Doesn't use threaded inserts, since it's a one-time assembly.

Just search "100w pd power bank module" on AliExpress. There are dozens of them.

Step file attached. Stl's are lame.

Feel free to comment. Any criticism is welcome.

 

Printing Notes:

In this case I used supports for all the internal surfaces, printing on the bottom side.

Tagi