Pi Zero2 W Slim Case For Extruded Aluminum Profiles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pi Zero2 W case for use with Openbuilds Extruded Aluminum Profiles.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is similar to a Raspberry PI Zero2 W case which I recently remixed. However, once I mounted the case, I found a number of opportunities which lead to this design. The main modifications were implemented to make the case slimmer and more serviceable. The circuit board is now inverted and mounted to the lid which allows the use of a Micro USB to match the orientation of the Micro USB on my Ender 3. This allows me to use a 90 degree up cable for both ends. Now that the board is attached to the lid, it allow the mount screws to be visible when the lid is off and can be easily tightened or adjusted. in addition, I also added a cutout for a camera ribbon cable.