1 / 4
Tweety Bird Love Valentine Lightbox LED Lamp — zdjęcie 1
1 / 4

Tweety Bird Love Valentine Lightbox LED Lamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Radiate love and nostalgia with this delightful 3D printable lightbox featuring the lovable Tweety Bird.

Ocena
0 / 5
Polubienia
8
Wydruki
0
Wyświetlenia
537
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables

Radiate love and nostalgia with this delightful 3D printable lightbox featuring the lovable Tweety Bird alongside the word 'Love.' Meticulously designed to capture the charm of the iconic character, this lightbox adds a touch of endearing whimsy to any space. Ideal for fans of classic animation or as a heartwarming decor piece, Tweety's presence combined with the message of love creates a joyful ambiance, spreading warmth and affection.

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

- remove purge line at the beginning of the print, it may interfere, specially with bigger prints!
 

 

 

Materials and tools:
- glue gun
- aluminum tape
- led strip (here is the one I use): simple 1m white led USB

- soldering iron (optional)

 

RECOMMENDATIONS

- use a textured PEI sheet
- remove purge line at the beginning of the print!
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20% to 25%
- Quality → Advanced → Avoid crossing walls
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color


How to make a hole in Bambu Studio:



Assembly video:

 

How to print without AMS:

Tagi