Framework Expansion Card Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Framework Laptop Expansion Card Box with Print-in-Place Lids
- Ocena
- 4,4 / 5
- Polubienia
- 43
- Pobrania
- 294
- Wydruki
- 7
- Wyświetlenia
- 1515
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
The Framework laptop comes with Expansion Cards. You'll probably find you need to carry some with you. I designed this box to carry four of them.
The box holds them with a clip inside the USB hole.
The features print-in-place lids kept shut with a 5mm magnet.
Prints fine from PLA or PETG at 0.15 or 0.20mm using a 0.4 nozzle.
If you can't make the print-in-place clearances, the lids can be snapped on later.
Only requires two 5mm magnets (max 15mm long)
Note:
- Be cautious of stringing inside the Type-C hole, you don't what that inside the plugs.
ps. If someone knows of a method to replace the maget for a comfortable printed snap-close mechanism, I would like to know.