ESPSomfy-RTS Case for ESP32c3 mini and C1101
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hardware case for ESPSomfy-RTS Project by rstrouse (thanx!)
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 698
- Wydruki
- 0
- Wyświetlenia
- 5015
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Hardware case for ESPSomfy-RTS Project by rstrouse (thanx!)
Integration for Homeautomation (as e.g. Homeassistant) for radio controlled Somfy Shades, Blinds pp. >> Project see https://github.com/rstrouse/ESPSomfy-RTS
Case is for using with the following components:
- ESP32c3 mini (e.g. https://de.aliexpress.com/item/1005005967641936.html)
- CC1101 433MHz module (e.g. https://de.aliexpress.com/item/1005005892782735.html)
Case was designed a bit “taller” so that wiring can be done without soldering - and “tougher” - maybe one might want to reduce the wall thickness to 1mm instead of 2mm.
ESP module needs to be pushed in - it will “clip” and then stick in place.
No screws needed, lid will keep in place without glue or screws.
Printing was done with PLA (PETG not tested), with 0.2mm Layer, solid without supports.