1 / 6
Cutlery/Condiment Caddy (with optional revolving base)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple caddy for cutlery, condiments and napkins available in two sizes with optional bases using 608 bearings.
- Ocena
- 5 / 5
- Polubienia
- 380
- Pobrania
- 764
- Wydruki
- 4
- Wyświetlenia
- 3832
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 4) (Komentarze: 9)Remiksy (4)Kolekcje (504)Powiązane
This caddy is perfect for those backyard cookouts or any informal dining table. Holds ample amounts of cutlery, napkins and condiments/seasonings. Two sizes 180x180 and 210x220. Will easily rotate on a hard surface, but optional rotating bases using inexpensive 608 bearings are available.
- Cutlery divider will friction fit, but may glue in if it pops out.
- Print with or without support. I painted support on the underside of the handle and the bearing cutout.
- Also useful as a tool caddy for 3d printing tools, paintbrushes, etc. My workspace is littered with several early prototypes being used this way.
- Printed with 15% infill (gyroid), but lesser percentages are likely just as effective
- Put felt or cork disks on top of the risers on the base to smooth rotation and lessen wobble from condiment weight
- Consider printing walls with fuzzy skin
- Can be scaled up or down if not using bearing bases