1 / 2
Skadis T-Clip XL Tape Measure Mount — zdjęcie 1
1 / 2

Skadis T-Clip XL Tape Measure Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Skadis T-Clip XL Tape Measure Mount

Ocena
5 / 5
Polubienia
51
Pobrania
303
Wydruki
5
Wyświetlenia
918
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I like the ease of printing of the Skadis T-Clip design but could not find a tape measure holder that was large enough so I designed my own.

This will hold a tape measure 47mm deep.  The T-Clips can be found below.  Be aware that the Original T-Clips do protrude about 3.5mm.  If this is a concern try the low profile version by tchoupshop.  Both models work.

Original T-Clips: https://www.printables.com/model/256896-skadis-t-clip-system

Low Profile T-Clips: https://www.printables.com/model/472294-skadis-t-clip-system-low-profile-flush-mount-clips

Tagi