1 / 1
Hotend unclogger for 1.5x300mm rod
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to quickly clear clogs from hotend in just moments without having to disassemble the assembly.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This takes a 1.5x300mm rod which you can get from amazon for around $6 for 10. You insert the rod into the handle.. That is it. You use it to push out clogs from your hotend. You do not need to disasseble anything so long as you're able to untension your extruder or otherwise remove if you're not able to untension it. Be sure to heat up the hotend to whatever the filament temperature is, maybe add another 10-15C to be safe and then push gently.
