1 / 4
AirTag Holder for Pet Collar / Strap (flexible TPU)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A flexible TPU AirTag holder for a pet collar or a strap. Tons of sizes.
- Ocena
- 5 / 5
- Polubienia
- 120
- Pobrania
- 663
- Wydruki
- 2
- Wyświetlenia
- 2284
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (162)Powiązane
No special settings required, outside of what you do to print TPU normally.
I did 3 walls, 15% infill, with 95A TPU.
The slicer setting “Avoid crossing perimeter walls” is helpful if you have issues with TPU stringing.
I prefer to insert the AirTag with the battery cover on the inside, to avoid it accidentally opening. I also prefer to face the AirTag opening towards the inside of the collar. Safety first!