Utility Case Low Boy Carry Rack System 2.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Utility Case Low Boy Carry Rack System 2.1
- Ocena
- 5 / 5
- Polubienia
- 180
- Pobrania
- 428
- Wydruki
- 3
- Wyświetlenia
- 3812
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like my work and enjoy my designs please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.
UPDATE Jan 20th Added shoulder strap mounting points, and added the required mounting holes in the left and right uprights to accommodate the extra parts. You will require an extra 2 M3x40mm and 4 M3x10mm fasteners if you wish to use the optional shoulder strap mounts. I recommend superglueing the mounts as well as using the fasteners. It's wide enough for a 1' or 25.4mm wide strap. The mounts can also be retrofitted to the older style uprights by drilling 4 holes with a 2.5mm drill bit, just make sure the mounts are square when drilling the holes so they don't interfere with the top case. For ease of identification, each one is marked with which side they go on.

Utility Case Low Boy Carry Rack System 2.1.
Ideal for a fishing tackle box or small parts storage system that can be wall mounted and/or transportable. Also useful as a print station maintenance and service small parts storage system.
Parts you will require;
6 M3x40mm fasteners
2 M3x10mm fasteners for the fixed handle, and an additional 2 M3x16mm fasteners if you opt to use the foldable handle instead. I recommend 20mm fasteners with the fixed handle if you are going to have a lot of weight in your cases.
320mm Length of 1" or 25mm velcro
Optional stick on rubber/plastic/silicone bumpers for feet
Optional shoulder strap mounts hardware-2 M3x40mm and 4 M3x10mm fasteners
The optional accessories adapter and wall mount adapters are simply superglued into the hex holes of the uprights. The optional side box is handy for long tools such as screwdrivers etc. You can mount one on each side.
If you use the optional wall mount you can store the rack out of the way and still remove it from the wall mount easily if you need to bring your parts storage rack system to your work station.
NB: All of the fasteners screw into the plastic.
Cut a piece of velcro to 280mm long and a piece to 40mm long. Hot glue one end of the long piece of velcro into the provided slot in the bottom and hot glue the 40mm piece of velcro of the reverse side on the top so when you thread the long piece of the velcro through the slot on the top the velcro secures your cases in place, as shown in the photo description.


All of the uprights are marked with L, R, or B on one end. They all go to the bottom facing in. You shouldn't see them once your carry rack is assembled.
The Utility Case Low Boy files can be found here:
https://www.printables.com/model/678588-utility-case-low-boy
No supports are required.
Happy printing.