Buckle Latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Buckle Latch, consisting of 3 3D-printed parts and 3 bolts. Added V2
- Ocena
- 5 / 5
- Polubienia
- 197
- Pobrania
- 1009
- Wydruki
- 1
- Wyświetlenia
- 4489
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Buckle Latch
for doors and boxes consists of 3 3D-printed parts, and can be screwed in place.
It is an overconstrained mechanism using an overcenter-linkage, Teaching Tech made an excellent video about the concept of this mechanism. I highly recommend watching it if you are interested in the design.
The Version 2 uses 2m metal rods instead of the 3mm bolts and the strength of the hook is increased.
Design
The design of the 3D-printed parts is done in Onshape, and the model can be found here:
The base part is printed as one to allow easy alignment when screwing it down, the thin connector can be cut easily when fixed in place.
Printing
I printed my parts in PCTG on a Prusa MINI in the orientation seen below.
Changelog
- 02.02.24 - Added V2
- 23.06.24 - Added separate step files and changed the orientation of the 3mf file
Happy Printing!