Sky Puck wall bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wall bracket made in two parts to hold a sky puck streaming device, the lower part (base) needs to have 3mm…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v2.0
A simple wall bracket made in two parts to hold a sky puck streaming device, the lower part (base) needs to have 3mm brass inserts melted into the holes as shown in one of the pictures, this will accept the screws to hold the upper part (lid).
The sky puck just slides into the bracket when it has been screwed to the wall and assembled, it can hold the sky puck either with the ports facing down or facing up.
The mounting holes for the wall are designed for number 8 countersunk screws.
The lid screws into the base with 3mm screws, various lengths can be used and is not critacal.
I have includes the step file for anyone who wants to tweak the design.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40%
Filament: Any PLA Any
Category: Other