Elektron Digitakt Digitone Tower Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will create a tower stand for the Elektron Digitakt and Digitone combo.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 190
- Wydruki
- 2
- Wyświetlenia
- 1963
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This will create a vertical stand for your Elektron Digitakt and Elektron Digitone combo. They are stacked vertically with this stand. Each printed as separate components and attached by M4 bold and nuts.
Required components to print:
4 x panel-connectors (to attach each component together)
6 x panel-bridge (to attach the right and left side together)
1 x panel-(left/right)-* (these are all the individual components that build the sides)
I used M4 x 20mm with a cylinder head, and bolds.
I used the default quality profile with 15% infill, printed with black Prusament PLA.
Printed with default PrusaSlicer profile for MINI+ 0.20 quality profile, 15% infill, 2 perimeters.
You probably can print with lesser infill, but have not tested it. Current settings feels robust.