1 / 2
Kryt tělesa na bojler Viessmann / Viessmann boiler body cover — zdjęcie 1
1 / 2

Kryt tělesa na bojler Viessmann / Viessmann boiler body cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Kryt topného tělesa na bojler Viessmann Viessmann boiler body cover

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
254
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Kryt tělesa na bojler Viessmann

Vytvořil jsem kryt na těleso pro bojler značky Viessmann. 

Na základě naměřeného originálního kusu, jsem jej následně vymodeloval ve Fusionu 360.

Na horní straně krytu se nachází logo značky Viessmann.

Následně se ještě ručně vyvrtaly otvory na šroubky (z důvodů přesnosti zde nejsou vymodelovány)

Parametry tisku:

Tiskárna: Ender 3 v2 neo

Filament: Creality PLA (white)

Čas tisku: 4h. 30min.

Spotřeba materiálu: 64g

V přiložených souborech můžete najít stl soubor, 3mf soubor, gcode soubor určený pro tiskárnu Ender 3 v2 neo, svg soubor loga viessmann, technický výkres modelu (zjednodušený)

a přiložené fotografie vytisknutého modelu a jeho použití na bojleru.

Při tisku jsem model nechal tak jak je, tím pádem se v otvoru pro kabel udělala podpora. Doporučuji zde organickou.

 

Pokud by se někomu hodilo, budu rád za podporu a ať se tisk podaří.

fkdesign 2024

.

English version of text:

Viessmann boiler body cover

I have created a body cover for a Viessmann boiler.

Based on a measured original piece, I then modeled it in Fusion 360.

The Viessmann logo is located on the top of the cover.

The screw holes were then drilled by hand (not modelled here for accuracy).

Printing parameters:

Printer: Ender 3 v2 neo

Filament: creality PLA (white)

Printing time: 4h. 30min.

Material consumption: 64g

In the attached files you can find stl file, 3mf file, gcode file for Ender 3 v2 neo printer, svg file of viessmann logo, technical drawing of the model (simplified)

and attached photos of the printed model and its use on the boiler.

When printing I left the model as it is, thus making a support in the hole for the cable. I recommend organic here.

 

If anyone could use it, I would be glad for the support and may the print be successful.

fkdesign 2024

Tagi