1 / 2
iGauging Plug for Firing Pin Protrusion Measurements — zdjęcie 1
1 / 2

iGauging Plug for Firing Pin Protrusion Measurements

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I was watching this video from School of the American Rifle: 5 Colt BCG Physicals https://youtu.be/8NmF0LCWdqU?t=966…

Ocena
0 / 5
Polubienia
2
Pobrania
30
Wydruki
0
Wyświetlenia
183
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I was watching this video from School of the American Rifle:

5 Colt BCG Physicals https://youtu.be/8NmF0LCWdqU?t=966 (Video link starts at 16:06) and noticed that he had to modify one of the included extension shafts of the iGaging Digital Depth Indicator Set so the firing pin would not go into the threaded hole. That got me thinking about printing something up. This is what I came up with.

The threaded plugs iGauge Base Plug.stl don't have the ejector notch tiGauge Base Plug Ejector hole.stl do. I like the notched one better. I don't have to remove the ejector to use. Both are sized to fit snug in the bolt face without getting stuck by the extractor. The plugs also help hold the bolt in place while testing.

iGauge Base Plug Small.stl - will fit into the gauge hole. use if you have no other support.

Like what you see and find it useful? Buy me a beer

Print Settings

Printer:

Franken-Ender

Rafts:

No

Supports:

No

Resolution:

2

Infill:

at least 20%

Filament:

G3T PLA

Black


Notes:

These are pretty small, you might need to use a brim. I usually print 4-5 at a time.

Category: Other

Tagi