Rimworld logo keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Rimworld logo keychain
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 480
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to make something from a few of my favorite games, and I thought that a keychain based on the Rimworld star would be a good place to start.
35mm diameter, 6mm thickness, 0.15mm clearances. No supports required, just make sure to print the shadow in the orientation shown in the exploded view.
Glue in the star with the pillars first, from the side shown in the exploded view. The pillars and the rings might need a bit of sanding to make it all fit nicely. The holes don't need to be perfectly aligned, clean them up with a drill after the glue dries (I used 1.5mm).
I added a STEP file, in case you want to scale it, or change the clearance.