1 / 1
Case for the Dorhea Raspberry Pi Camera
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified this design to fit the Dorhea Raspberry Pi Camera
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified this design to fit the Dorhea Raspberry Pi Camera.
See: https://www.amazon.ca/dp/B07DNSSDGG
Works with all off the referenced parts from the original listing. You will need 4x M3 screws to attach the front
