Modular Organizer Drawers alternative design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular Organizer Drawers for small items.
- Ocena
- 4,75 / 5
- Polubienia
- 222
- Pobrania
- 964
- Wydruki
- 5
- Wyświetlenia
- 4994
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I liked the design of the original by Andre Campos but needed different dimensions. So I started from scratch.
I also wanted to be able to flip the drawers upside down and not have all the contents get mixed up or fall out accidently. So some differences include:
Increased height of the drawer inside walls.
Added small stops to keep the drawers from coming out all the way. Added an iffy lock to keep drawers shut. (If there is a good way to implement a convenient lock for this type of thing I'd love to know of it).
Added cutouts to the shell to reduce filament use.
Added small surface for contents sticker in each compartment.
These drawers are NOT compatible with the original by Andre Campos
https://www.prusaprinters.org/prints/54131
Printed in PLA. No supports.
Used a brim for the connectors. Printing the connectors on my Prusa MK3S+ w/ 0.4mm nozzle and default 0.45mm extrusion width gives a tight snug fit.