Adding removable brace mounts. to the Lack enclosure top, front, left and right corners.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This .3mf file is a remix of the 2 front top corners of the Lack enclosure. It adds brace mounts for a removable brace
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 355
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When I built the enclosure I found the design to be good, but wanted the top front to be stiffer. This is the enclosure I am remixing parts from. https://www.printables.com/model/3673-mmu2s-enclosure/files
I added a removable brace. Mounts for a removable brace are added to the top front corners in this remix so they can be printed as one unit. This was done in the .3mf to keep the print settings that were added in the original .3mf files.
For the brace models, see https://www.printables.com/model/641247-lack-enclosure-removable-front-brace The option to print out the brace mounts seperately are in these files also.
I removed the supports in the magnet slots. They are narrow enough to bridge easily. Removing the supports was a problem when I made the enclosure.
The picture shows the brace installed. The colors show the 2 pieces of the brace. This picture has the brace mounts screwed on.