1 / 1
Plant Stacks! - Wire/Cable Leg Guides
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Plant Stacks! - Wire/Cable Leg Guides
A collection of attachments to secure and hide wires. Can also serve as a leg brace if a leg extension is loose.
To apply it to your support, I recommend sliding it onto the leg from the end, but you can also bend it around the side of the leg in a pinch.
For use with modules such as the:
- Accent Lighting Ring
- SSD1309 OLED Sign
Variants:
- “Inner” (guides wires along the inside of the leg) and “Outer” (guides wires along the outside of the leg)
- “Closed” (full length track), “Open” (5mm gap at one end to let wires in/out), or “Slotted” (cut out to accommodate the supports angular bars)
Print Instructions:
- For best results, try printing them standing up with a brim.
- Flat side down will also work.
- Supports from print bed might be helpful with the “Open” or “Slotted” versions.
Part of the Plant Stacks! system of plant supports and accessories.