1 / 3
Mount for Sanzang SZPW25 2,5" USB-C SSD / HDD Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mount for screwing a "Sanzang 2,5" USB-C SSD / HDD Case" to e.g . a wall or a table.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 385
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed a mount for the SSD Case - so I sketched this holder up in Fusion360.
The measurements of the SSD Case are:
*Width: 80 mm
*Thickness: 14,1 mm
*Height: 128 mm
It might fit other SSD Cases as well, or you can make it fit - I included the Fusion360 model.