Mason Jar Wall Mount - 66mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A smaller version of my first mason jar wall mount with variations to better fit small wife mouth mason jars
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Highly recommended to print with PETG, but if you only have PLA, I've included some notes below.
Print on side as shown.
Jar may slide down and rest on brim if heavy enough. Might benefit from some tape on the inside of the clamp to add more grip.
Obviously, watch out. Mason jars can break and spill glass everywhere so be cautious of where you place them in case the jar falls.
Things you can hold!:
- Nuts and bolts
- Toiletries
- Snacks
- Flowers
- …!
If printing with PLA:
After printing, carefully stretch the clamp to loosen the material. I like to clamp it around a mason jar overnight before mounting. This will help prevent shattering.