Button for Splendide WD2100XC(P)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This replaces the power button on our Splendide 2100XC washing maching, but may work for other Splendide models as…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This replaces the power button on our Splendide 2100XC washing maching, but may work for other Splendide models as well.
Print Settings
Printer Brand:
Creality
Printer:
LD-001
Rafts:
Yes
Supports:
Yes
Resolution:
0.16
Infill:
25%
Filament: Anycubic Resin Grey
Notes:
I used a Creality LD-002R SLA printer with Anycubic Grey UV resin. Default settings for this printer in Chitubox with "general purpose resin" profile.
Light supports with a raft.
Post-Printing
After printing, I removed the supports and washed in 99% isopropyl alcohol. Cured with a UV lamp for 10 minutes on each side.
After curing, I used 600 grit sand paper to remove traces of the supports.
How I Designed This
This part is very similar in design, however the size and proportions did not work for me: https://www.thingiverse.com/thing:449581
My part was created with Tinkercad.
Category: Replacement Parts