Extended Filter Section for modular room air purifier 120mm fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extended Filter Section for modular room air purifier 120mm fan
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 662
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I like the idea of the modular room air purifier that was built by @Mayhemv01_701433
However, I wanted some thicker filters in there.
After some searching, I found multiple projects that use the filters from Zortrax, which can be bought at a reasonable price (35 Euro for 3 sets of carbon and HEPA filter).
Instead of designing the filter carrier from scratch, I modified the filter frame to accept the filter frames from @danielschweinert 's AirManager V2
All the holes are still in the same place, so it works with the existing components from the modular air filter.
For the air filters, you can use the ones from the AirManager to hold your filters.
They are specially designed for the Zortraf filters.
I recommend inserting the filters with the hole at the back and the skiny side on the inside.
This way, you can squeeze the filter out by pushing on the thick frame.
It's tight, but also nearly airtight ;-) (I had to use a file to fix some minor defects in the print).