1 / 5
Sovol SV05 USB Lamp Mount (JANSJÖ LED USB lamp)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts the Ikea lamp to the extrusion
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
I wanted to illuminate the print bed on my SV05. I had an unused Ikea JANSJÖ LED USB lamp, so I modelled this lamp mount for it. The back of the mount attaches to the 40x20 extrusion with screws and t-nuts. The lamp is sandwiched between the front and back parts with M4 screws. The flexible neck has been convenient for lighting up different areas of the bed.
0.6mm nozzle, 0.3mm layer, PLA, Sovol SV01