Double-Sided Shower Hook (Sturdy and Scaleable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a sturdy and scaleable double-sided shower hook. Quick to print and doesn't use much filament.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 162
- Wydruki
- 1
- Wyświetlenia
- 457
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Overview
This is a sturdy double-sided shower hook. Great for towels, wash cloths, etc. if you don't have a towel bar nearby. I designed this to fit my shower which has a width of just under 1".
I designed the hook to be non-slip by virtue of there not being any curved areas where the towel is hung on the hook. The straight edges and corners allow for better grip.
Scaling
The internal width of this model is 1", which means it'd be straightforward to scale it to whatever your shower's width is (if your shower is 1.5" wide, you'd scale this to 150%, for example).
Recommended Print Settings
- I printed these with PLA, but PETG should also work fine.
- I used 30% infill for strength. You could go more or less and be fine, though if you scale up, I would increase the infill.
- I used 4 vertical shell perimeters. This may not be necessary, but I figured it'd help with strength and durability.
- The included .3mf file has these settings already applied.
Design
I designed this model in Tinkercad.