1 / 5
Small parts (Nuts and Bolts) dividers for Really Useful boxes 0.35 Litre — zdjęcie 1
1 / 5

Small parts (Nuts and Bolts) dividers for Really Useful boxes 0.35 Litre

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A set of parts divides for the 0.35 Litre - Really Useful Box

Ocena
0 / 5
Polubienia
17
Pobrania
55
Wydruki
0
Wyświetlenia
1184
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

I am a big fan of the Milwaukee Packout Range of storage but I needed a way of adding small parts storage - especially the machine screws use to make Voron Printers!  I found that the 0.35Litre Really Useful Box fits very well into their 3 Draw Packout unit (4932472130). So designed these liners to fit within the RUB boxes.

I have moved over to Orca Slicer and had some odd de-laminations in the thin walls so based on a 0.4 nozzle I used the following changes from the default strength 0.2 settings

Wall Loops - 1

Infill - 50%

Rectilinear Top/Bottom/Infill

If you have more loops then the internal wall don't mesh and are weak.

I use eSun ABS+ for most things and on my Voron 2.4 (245/110) these print fine without any brims.

Tagi