Laundy rack/rod for handrail mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A laundry rack / rod for mounting on a wooden handrail
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
A laundry rack (or better: rod) for mounting on a wooden handrail. The rod is of wood, and the mounts are 3D printed, with a clamp and big plastic screws to fasten this without damaging the handrail. My wife requested this to dry landry (especially bedclothes ) in the stairwell.
The big screw should be screwed first into the main part, Then the clamp can be clicked into the screw.
All printed in PLA with 7% infill The main part should be printed with tree support, but probably also printable without support at all. For the other parts, no supports are required. The STL files are quite big because of the required resolution of the screw threads.
The wooden rod has 27-28mm diameter and is secured with two screws 3x25mm.