Lazy Susan Spice Rack Turntable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 part model I made for a lazy Susan since we couldn't find anything to fit our cabinets in our apt.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 797
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
4 part model I made for a lazy Susan since we couldn't find anything to fit our cabinets in our apt. The top turntable, turntable base, bearing frame and bearings.
I made this to be assembled upside down and can be a multi-material print. I printed the “ball bearings” from TPU, just up the walls until the 9mm sphere is solid (still testing may up the dim to 9.75mm or 10mm depending. I didn't model the bearings just added a primitive sphere in bambu slicer and went with that. the body pieces I printed in PETG with PLA supports
turn the top over, drop in the bearing frame , fill the cutouts with the TPU bearings, evenly as you care to be, add the base and in theory all should be well. I used a heatset M4 insert/ machine screw on one test version and a set of magnets on the other. Honestly double check that hole size for your inserts and use a primitive cylinder to adjust opening to the correct size, modeled with the hole in the dead center so you should be able to center everything in your slicer to ensure alignment. Screw version ended up as the spice rack and the magnet version as a tea caddy.
Highly recommend testing the magnet version while it's still upside first! If you don't you may have a sudden you TPU ball hail storm in your hands. Don't ask me how I know.