Kobalt 24V Trim Router Base Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A base plate for the Kobalt 24V Trim Router that is very similar to the original plate that comes with the router.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I was unable to find a base plate that would work with my Kobalt 24V Trim Router, so I decided to model the one that came with it. I plan to design additional attachments following the bolt pattern for this router. The eventual goal is to design a plate I can mount to a table to make using this router even easier.
Be careful when taking the screws out that hold the plate, I dropped one into the motor and had to spend a good hour trying to get it out!
I printed this with Inland PLA+ using 50% infill and a 0.4mm nozzle. Ideally you could print with PETG or stronger, but this seems adequate to use as a replacement base plate.