Comma 3X dashmount for Kia EV6

This model allows you to mount the Comma 3X from Comma.ai to the dashboard of a Kia EV6. The bottom of the mount is contoured such that it matches the back of the in-car navigation system, to which it can be adhered with some kind of adhesive (e.g. 3M dual-lock or VHB).

This allows easy, non-permanent installation of the Comma 3X in a relatively low position, where it may obstruct the driver's view less severely.

It's necessary to print this with supports. The Comma 3X requires as much rigidity as possible so I printed the mount on its side, so that the mount would have plenty of vertical rigidity when installed.

I've tested ASA and PA-CF. 15% adaptive cubic infill is sufficient but more is better.

For extra strength, a modifier in PrusaSlicer can be used to increase the amount of infill and the number of wall loops specifically in the areas where it's most helpful, such as the thin bend near the top of the mount. This bend doesn't have a lot of material but the rigidity of the mount is entirely reliant on it so a bit of extra infill would help.

Example illustrations:

Modifier:

Resulting slice:

Hopefully goes without saying but I take no responsibility for any use of this mount.

Since this mount uses the original Comma AI mount, here's the license Comma gives for their original mount (link):

Copyright (c) 2016, comma.ai

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

My mount is licensed CC-BY-NC-SA.