1 / 2
Anycubic Kobra series - raised feet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anycubic Kobra series - raised feet
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 641
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (10)Powiązane
Anycubic Kobra series - raised feet
ABS print
D 20 mm x 20 mm
I made these extensions because the hot air released from the motherboard area, under the printer, is released faster.
It needs longer screws to also attach the original feet of the printer, as can be seen in the photo.