Stargate Naquadah Brick Puzzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple 24 piece puzzle and frame - Looks simple enough - I don't think so...
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 77
- Wydruki
- 2
- Wyświetlenia
- 1366
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial
While this looks a lot like the first one - this one is twice as hard…
On my original puzzle, the pieces had essentialy two possible orientations for each piece. of course with no easily identifiable design (the top looks all alike). At least you knew which was was up!
Not anymore…
That's right - the puzzle is printed as “bricks” on both sides.
This one should be fun.
This is a long print, but also an easy one. I am including print files for both the frame and the pieces (printed all at once). I am also including individual files for each piece (in case you lose a piece!). No supports are needed for this print.
I have included a built-in color change in my print. i printed mine with Inland Silk Silver PLA & Inland Black PLA+
PUZZLE PRINTING
You can print this all at once or as separate parts. If you choose to do the color change (at the center)
Start print with first color
Change to second color at: 6.20 contine print
Change to second color at: 7.40 finish print
The frame is also a long but easy print - allows you to display all the parts (like on the coffee table).
The included print files are for the entire frame with color change and the parts printed all at once.
Please leave your comments!
NOTE: I have included a Solution Document (a pdf), that is sized exactly matching the printed frame and puzzle - this is in a zip file so that it is not openly displayed here!