Baby teeth box clamshell with magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted something nice to keep my 6yrs old's baby teeth
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 507
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
I designed this my self, i wanted roughly a mouth shape upper an lower jaws. Both halves have lids held with hinges and clips. The two halves held together with 8mm x 2.7mm cylindrical neodymium magnets.
I printed this using black tough pla (i just wanted black, that was what's on the machine) with 0.1 quality prusa settings, with regular supports, on my mk3s+. Tolerances are fine, but tight. So you might need some fiddling around.
I used standard paper clips as joint hinges. Very tight. I cut a straight piece from the clip, and pushed it with a flathead screwdriver tip.
My magnets are pushed in tight and held in there without glue, if pla decide to loosen up later, i'll glue them in place. Watch out for their alignment before pushing them in ! << !
Also i havent tested the sizes of the larger teeth, i hope they work, i'll update the design if containers are too small i only have front incisors at the moment, they are small.
Video to see it in action: