1 / 6
Lego Speed Champions Graded Display Stand (updated)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display your cars from your collection on the shelf in an attractive way – with 3D printed display stand.
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 348
- Wydruki
- 1
- Wyświetlenia
- 2819
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (59)Powiązane
I like the idea of arranging the cars from the Lego Speed Champions collection on shelves above each other, like MroznyHipis suggested. I also like modularity, but not when it smacks of assembling lots of interchangeable parts, unnecessary post-processing and using screws. So I designed a solution for 4 (or just 3) cars from scratch that fits perfectly on, say, an IKEA Billy bookshelf.
Instructions:
- Choose a base for 4 or just 3 cars (depending on your shelf depth).
- Choose the correct head (pictured) for your car's chassis.
- Print the base and the number of heads for the chosen number of cars.
- Print on a 0.2mm layer, 3+ walls, no supports for everything except the Head 6×4 with studs (print studs horizontally at the top, use organic supports for the bottom surface).
- Use high quality material and temperature for strong interlayer bonds; better ABS/ASA than fragile PLA.
- Placing heads for Lego Speed Champions (and compatible) chassis can be done by just sliding them onto the base pins.
- Enjoy your Lego Speed Champions collection. 🏎
Updates:
- 240613: Added 6×2 thinner head for cars with special chassis like McLaren Solus GT (from Lego 76918).
- 240425: Added 6×2 head.
- 240217: Added two more heads for newer/older cars – longer 8×4 and 6×4 with studs for cars without slots in chassis.