Base for 3dConnexion SpaceNavigator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base for 3dConnexion SpaceNavigator cad mouse
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I was given a SpaceNavigator that was removed from some industrial equipment and didn't have the stock metal base, so I decided to model one! This is a shell that eventually became part of a handrest.
I'm posting the model in case it's useful to anyone else. I would not suggest printing this unless you have the ability to make it heavy or are integrating it into something else: the original base is made out of Stainless Steel and is quite heavy, as the mouse has push/pull features that require that weight.
This was a quick test print to make sure that I didn't mess anything up. Also note, the feature at the bottom is for you to press in the cable strain relief so that it doesn't get ripped off the board in normal use.
Printed at .15mm, 35% infill PLA on an Ultimaker 2+
If you have any questions, please feel free to comment. Thanks!