Filament cleaner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model was made for my Ender 3 V2 Neo. It's very cheap and fast to print
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
You will need to print the 2 halfs of the sponge socket, then the holder. I used some elastic bands to hold the two parts together To mount it, you will need to unscrew the z axis as well as the little thing held by the screws. Be very careful when doing so, the screws might get stuck with the bolt underneath them, unscrew this first. ATTENTION: if you want to mount this, keep in mind that you could break some important parts of the 3d printer, I suggest you to watch some disassembly videos before you try to do it. I did it myself and paid the consequences.