1 / 2
The Voronoi (Holey) F**k  – A fox-duck hybrid [REMIX] — zdjęcie 1
1 / 2

The Voronoi (Holey) F**k – A fox-duck hybrid [REMIX]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This Voronoi-style model is best suited for when you can only give a partial f**k - or even, a "holey" f**k.

Ocena
0 / 5
Polubienia
8
Pobrania
27
Wydruki
0
Wyświetlenia
211
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution — Noncommercial

Sometimes you can only give a partial f**k, or a holey f**k. This Voronoi patterned remix of my unique fox-duck hybrid allows you to do just that!

My original f**k model was modified by me in Blender to add the Voronoi pattern.

The story of the f**k

Sometimes you find yourself out of f**ks to give, so why not 3D print some more?

This is the ‘F**k’, a unique fox-duck hybrid creature – hence the name. These small creatures are designed to be printed quickly and without supports.

Give a f**k to your friends and loved ones, if you wish. If you find yourself getting overwhelmed, you can tell them you have no more f**ks to give.

PS: A group of f**ks is called a cluster f**k.

 

Printing tips

Good layer adhesion is essential due to the small surface area at the base. Highly recommend using a brim or raft, and heated bed.

To avoid stringing, make sure your retraction is calibrated. Wisps can be eliminated by carefully running a lighter over them after printing.

Layer height: 0.1mm

Nozzle: 0.4mm

Walls: 2

Infill: 8%, 3D Fill/Gyroid

 

This took a little over three hours to print on my Flashforge Adventurer 3 Pro 2, in eSun PLA Matte - Tangerine. I was able to get success without any supports but did require a brim.

Tagi