1 / 1
Prusa Mini/Mini+ 3030-Profile Slot Cover — zdjęcie 1

Prusa Mini/Mini+ 3030-Profile Slot Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protects the slots of the profiles from filament residues.

Ocena
4,939 / 5
Polubienia
269
Pobrania
1067
Wydruki
72
Wyświetlenia
4207
Oceny
66

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Slotcover fits for the 3030 profiles of your Mini/Mini+!

Please measure the two pieces for the right side. The length depends of the location of the mounting plate for the z-axis. You can adjust the lentgh in your prusa slicer or any other ;-).

Additional there is a 10mm long piece for custom lengths.

Best optical results, if you use the textured print sheet.

In case, that the printer didn't find the g-code file on your USB-Stick, please short the filename.
It's way too long. ;-)

 

Tagi