1 / 13
Long travel shock mounts for Axial SCX10 2 — zdjęcie 1
1 / 13

Long travel shock mounts for Axial SCX10 2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is the V1.0 of shock hoops for the SCX10 2 that allows for straight (not angled) long travel 40+mm (1.6") on SCX10

Ocena
0 / 5
Polubienia
13
Pobrania
80
Wydruki
0
Wyświetlenia
1086
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of SCX10.2 shock front hoops by justicedspencer

This is the V1.0 of shock hoops for the SCX10 2 that allows for near 1:1 motion ratio and scale angle shocks (straight up and down, not angled) and allows for long shock travel while maintaining a low ride height.

The shocks I used in particular are the Proline Powerstroke XT with two 3/32 holes drilled in pistons in conjunction with 10wt shock oil. I used these shocks because they have a shock travel of slightly more than 1.6" (replicates full scale of 16" travel coilovers).

The goals for the next version are:

To reduce binding in steering ( axial long servo horn contacts panhard mount).

To reduce binding at extreme flex angles on the top shock screw/mount hole

Create a mounting mechanism for a body (Although the shocks and shock mounts will come through the body so holes will have to be made)

Update 5/11/21: Add-on body post/mount can be found here:

( https://www.thingiverse.com/thing:4856123 )

More Details on this crawler here: https://houseofrc.com/register?token=cgz8yNJml7rdgDHKQsf6y6hN8faFYSlveAJjko27mMiNHN2hm2y7zp1FnxPQJ6rtBKW9gp7X8EagNtuq

Print Settings

Printer Brand:

Prusa

Printer: 

i3 MK3

Rafts:

No

Supports: 

Yes

Resolution:

.2

Infill: 

100

Filament: Generic PETG Black

 

 

 

Category: R/C Vehicles

Tagi