4th Gen Cummins Ram Intercooler Air Shroud - Version 1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Note: Version 1 is not perfect, it doesn't extend all the way to the bottom of the intercooler. When I have more time…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 443
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Note: Version 1 is not perfect, it doesn't extend all the way to the bottom of the intercooler. When I have more time I will make a new version that extends to the bottom and has a 90 degree extension that reduces air loss below the intercooler.
Mopar/RAM only sell the air shroud as one piece (covers both sides and lower intercooler). If you are looking at this thing you likely have destroyed the factory air shroud like thousands of other folks.
The goal for this thing was to have two independent sides without a lower section. I fabricated a protective skid plate/lower air vane out of 304 stainless and had no use for the lower shroud.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Supports:
Yes
Resolution:
0.15mm
Infill:
100
Filament:
Max PETG, PC
Category: Automotive