Jeep 96-98 ZJ Center Console Molle Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created a Molle/PALS rigid panel for center console.
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 246
- Wydruki
- 0
- Wyświetlenia
- 1791
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Decided to design a Molle panel for my 98 Jeep ZJ Grand Cherokee. It fits the center console lid with enough room to slide pouches and other Molle or PALS gear. It may fit other Jeep consoles or other makes/models, but I designed it specifically for the 96-98 Grand Cherokee.
Printed with Creality Hyper PLA on 100% infill for strength. It won't see any sunlight or major heat, so PLA should be fine.
Uploaded two designs…One has 10mm offset spacers, other is flat for use of whatever spacer you want.
Requires a bit of work to assemble the console:
Disassemble the console to access the inside. I used 1" (inch) 8-32 machine screws and nuts. 4 each are button heads (See photos), and 2 each are countersunk flat heads to clear the cup holder slide function (See photos). I trimmed off the excess screw protrusion with a Dremel, but you could use smaller hardware or cap nuts.